oncat.

Replacing Front Parking Aid Sensors

Told by Brian B. 5 November 2026 Maintenance 11 photos

Photos · 11

Having only recently refitted the front bumper after extensive front end work on the engine, I found that the parking aid system [front and rear] failed to work. I have experienced this issue before in 2013 just after I bought the car when I found that the outer front O/S sensor had failed. If one sensor fails it disables both the front and rear parking aid. The indication that the parking aid has failed is a five second continuous tone after starting the car along with the overhead console 'P' switch showing a red light. I had hoped that it again was an outer front sensor as these can be accessed by removing the front bumper under tray. However on checking the system with my Autel diagnostics device it showed that the failed sensor was the inner N/S Front sensor. The inner front sensors can only be accessed by removing and dismantling the front bumper. I do have some spare sensors but given that the age of those were unknown and the three working ones on the front bumper were 'factory' [21 years old] I decided to replace all four. The images tell the story.

On its timeline Entry 22 of 24
2013 This entry, November 2026 Now

More about this Jaguar

You’re offline. Oncat will carry on when you’ve a signal.